JP Instruments

EDM-900 Primary

If you are redoing your panel, consider a primary JPI EDM. With the 900 on board, you can remove many of your old engine gauges, open up valuable space in your panel, and fly with peace of mind knowing the JPI will alert you instantly if any of the parameters exceeds the programmed limit.

EDM-930 Primary

If you are looking for a larger, Primary engine gauge replacement, the TSO’d EDM 930 (3.3″ deep -5.584″ wide – 5.11″ high) will flush mount into your panel. With a large sunlight readable, LCD display, JPI’s flagship monitor offers almost unlimited options and configurations. 7 or 9 cylinder, no problem for all JPI products, and their fast response grounded EGT probes and copper tipped CHT probes are by far the highest quality hardware available.

EDM-960 Twin

The EDM-960, STC’d as Primary engine instrument, takes the best from JPI's EDM-760 and adds total engine display monitoring including Tach, % Horsepower, Hobbs, Manifold Pressure, EGT, CHT, Oil Pressure, Oil Temp, Fuel Flow, Outside Air Temp, Volts, and Amps plus optional Fuel Pressure, Fuel Quantity, and Turbine Inlet Temp.

EDM-730

With the EDM 730, it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.

EDM730 Upgrade

Upgrade your JP Instruments EDM700 to the EDM730 for a discounted price. Uses existing system wire harness, probes and Transducers.

EDM-830

With the EDM 830, it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.
%HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure + USB

EDM830 Upgrade

Upgrade your JP Instruments EDM800 to the EDM830 for a discounted price. Uses existing system wire harness, probes and Transducers.

EDM-790

The EDM 790 has a sunlight readable screen LCD screen with over 30 functions available. Using the latest microprocessor technology, the EDM will monitor up to twenty-four critical parameters in your engine, four times a second, with a linearized thermocouple accuracy of better than 0.1 percent or 2 F° which has been verified and tested by the FAA and thus TSO’d. The EDM is constantly "red-line" checking all 29 critical parameters (not 16) that are automatically checked FOUR TIMES A SECOND, regardless of current display status.

EDM790 Upgrade

Upgrade your JP Instruments EDM760 to the EDM790 indicator for a discounted price. Uses existing system wire harness, probes and Transducers.

FS-450

Available with Gravity or Pressure flow transducer.
The JPI Fuel Scan–450 features a dual display, always showing your fuel flow rates on the upper display and other measurements on the bottom. The scan rate to display these measurements can be adjusted at a user selectable rate. Every Fuel Scan–450 will interface with your panel mount or hand-held GPS. There are no extra options to purchase.

FS-450 Twin

EDM350

4 or 6 EGT/CHT, Shock cooling, LOP/ROP, Volts, Hi/Lo Alarms, Google Map, USB

Compact size, full customization features, with legendary JPI quality and accuracy. The Engine Data Management 350 system is the most cost effective, reliable piston engine experimental EDM instrument on the market.

EDM-900 Experimental

The EDM-900 has a built-in EDM-800 plus many other gauges in combination together.  The reliability and ingenuity of many JPI products are bundled together in one spectacular "all-in-one" instrument.

EDM-930 Experimental

Think of your EDM-930 as your personal flight engineer. Always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. Your EDM-930 will be monitoring your engine conditions 4 times per second and will warn you instantly if any measurement exceeds the programmed limit.

Flush Mount Kit

Optional Flush Mount for EDM730/830.

Fuel Pressure (Non-Turbo)

Optional Fuel Pressure for EDM900/930.

NOTE: Special discounted pricing applies when the fuel pressure option is ordered in conjunction with an engine monitor.

Flush Mount Kit

Optional Flush Mount for EDM900.

FXT201