The Engine Data Management 730 and Engine Data Management 830 systems are the most advanced and accurate piston engine-monitoring instruments on the market. TSO’d for quality, the EDM 730/830 is not just another black box along for the ride. It is a Flight Engineer ... a Maintenance Manager ... a Backup Instrument. For the price there is nothing that gets close to it. You can alost think of the EDM 730/830 as your personal flight engineer. It’s always there, working in the background, constantly watching over your engine while you concentrate on flying the aircraft. You can make an entire flight without ever pushing a button, if you so choose. Yet your EDM will be monitoring your engine parameters three times a second and will warn you instantly if any parameter exceeds the programmed limit. With the EDM 730/830, it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.
- Improved engine efficiency
- Reduced maintenance costs
- Greater fuel economy
- Reduced operating costs
- Smoother engine operation
- Proper engine temperatures
- Longer spark plug life
- Reduced engine vibration
Features:
- Fits a standard 3.1" hole
- Housing off center
- Rotates 90 degrees 4 times
- Fits the standard JPI harness
- EDM-700/800 upgradable
- LeanFind (tm) Performs ROP and LOP, automatically finds the first and last cylinder to peak
- Shock cooling checked on all cylinders with an alarm on the cylinder with the highest cooling rate
- Voltage, for alternator failure, monitored for over and under voltage with alarms
- Pilot Programmable Hi & Lo alarm limits. ALL programming from front panel
- 3 year warranty (Electronics)
- 1 year warranty (Probes)
- Quick response probes, fastest accurate readings, harness and hardware
- Data Memory, reading once every 2 to 255 seconds. To be down loaded to USB stick
- EZPlot-1 program for downloading data and plotting data
- USB down load port built in with memory stick
- Full color TFT screen
What's Included (some functions available only on EDM830):
- EGT 4 or 6 probes
- CHT 4 or 6 probes
- Volts
- Shock cooling
- Span (highest to lowest EGT)
- LOP/ROP JPI Exclusive Leaning Mode
- Power connector
- EGT/CHT Harness (EDM730)
- All required Harness (EDM830)
- EZTrends
- Data recording-100 hrs. Download USB
- 1 GB memory stick
- Selectable Positions for Linear gauges
- Fuel Flow (USED, Remaining, GPH
- Endurance, GPS destination)
- RPM
- MAP
- Oil Temperature
- Oil Pressure
- OAT
- %HP (Requires: OAT, RPM, MAP, & FF)