The MicroPulse landing light controller is a solid state, compact and lightweight lighting controller. It features dual channels and provides Wig Wag and multiple rate control for any combination of LED, incandescent, and HID landing lights. The MicroPulse has an eight position function mode switch.
Model 9100-001-M uses ring connectors with 8A maximum current.
Many setting to choose from:
- X – both circuits are off
- S – Starboard/Right on only
- P – Port/Left on only
- S+P – Both circuits on
- A44 – Alternate at 44 PPM (STD)
- B44 – Both flash at 44 PPM
- A88 – Alternate at 88 PPM
- A120 – Alternate at 120 PPM
- MicroPulse Landing Light Controller with ring terminal connectors
- Greatly increases the visibility of the aircraft in both daylight and nighttime operations which improves the safety of the flight
- Compact, lightweight, powerful, solid state reliability to give that Wig-Wag effect
- No outboard heat sinks or rheostats
- Works with all major brands of lights
- Gives the operator complete control over his landing light and/or taxi light
- RTCA/DO-160G Qualified
- Comes with MicroPulse unit, installation instructions, spade terminals, placard, drill guide, and knob
- One year limited warranty
- Made in the USA
- Weight: 1.49 oz
- Dimensions (Panel label): 1.5 in (diameter)
- Dimensions (Control unit): 0.90 x 2.86 x 0.90 in
- Capacity: 40 Watts @ 5 VDC, 96 Watts @12 VDC, 192 Watts @ 24 VDC, 224 Watts @ 28 VDC
- Voltage range: 12 to 35 VDC
- Max current: 8 A
- Controlled output: 0 to 12/35 VDC, 0 to 8 A
- Operating temperature: -30°C to 65°C
- Approvals: FAA PMA STC SA01800SE, RTCA/DO-160E Tested/Qualified
- MicroPulse unit
- Installation instructions
- Color coded terminals
- Reference panel label
- STC printout for your logs
- Installation template
- Knob
- All hardware needed for the install
- Allen wrenches for tightening terminal connections and knob set screws
