Leading edge technology and sleek, supra aural design puts the new DC PRO-X2 a generation ahead of any other aviation headset in its class. The perfect combination of comfort and performance and the ideal headset for both general aviation and commercial pilots that prefer the unmatched, lightweight comfort of a rest-on-ear headset design. From its feather-light yet extremely rugged alloy head band and suspension system, to its best-in-class Hybrid Electronic Noise-Cancelling technology and Bluetooth compatibility, you simply won't find a better headset or a better value.
New features include:
- Enhanced Auto Shutoff that prevents accidental loss of battery power (patent pending)
- Automatic Gain Control (AGC) for optimum ANR performance in high-noise conditions
- Sleek, redesigned oblong dome for greater rest-on-ear stability and improved audio performance
What hasn't changed are the many comfort and technology features that made the original DC PRO-X headsets so successful, such as Hybrid Electronic Noise Cancelling ANR performance, Outlast®, heat-absorbing head pad technology; swivel hinge stirrup design that dramatically reduces clamping pressure; plush leatherette ear seals for pillow-like comfort and lightweight, yet rugged alloy suspension system. And of course, DC PRO-X2 headsets still come with a 30-Day, Money Back Guarantee and 5-year Warranty.
- Enhanced Auto-Shutoff feature virtually eliminates accidental loss of battery power
- Automatic Gain Control (AGC) for optimum ANR performance in high noise conditions
- Hybrid Electronic Noise Cancellation with advanced feed-forward and feed-back technology provides best-in-class active noise reduction
- Dual voice coil drivers provide fail safe operation to ensure full communication in the event of battery loss or system failure
- Digital Signal Processing (DSP) ensures high-fidelity audio for superior communications and music listening
- Bluetooth® wireless technology provides seamless integration for connecting to cell phones, MP3, tablets or other personal electronic devices
- Stereo/mono switch
- High performance, electret microphone with enhanced noise cancelling
- Rugged yet lightweight magnesium alloy headband and suspension is adjustable for personalized fit
- Low profile, Outlast® fabric head pad with vented design absorbs excess heat to keep you cool and eliminates 'hot spots'
- Dura-Stitched, leatherette ear seals with slow recovery foam cradle the ears in comfort and eliminate heat buildup
- Compact, in-line control module with backlit, touch key user interface controls On/Off, Bluetooth® wireless technology and volume control
- Control module powered by two (2) AA batteries for up to 50 hours of use
- Collapsible, folding design for compact storage in David Clark headset bag (included)
- Five-year warranty
- FAA TSO C139a Approved
- Weight (without cord assembly) 7.5 oz.
- Ear coupling: On-the-ear
- Hardware: Lightweight Alloy
- Connector Type: Standard dual plugs
- Connection Cable: 0.155" (4-mm) OD shielded cable, length ~ 6.9 ft. (2.1 m)
- Battery life: Up to 50 hours (2 AA batteries)
- Operating temperature: -20°C to +55°C
- Operating voltage: 3VDC (2x AA)
- Dome type: ABS
- Characteristic SPL: ~91 dB SPL (1 kHz, 1 mW) @ maximum volume nominal
- Contact pressure: ~0.6 lb. (2.7 N)
- ENC peak attenuation: 30dB @ 150Hz
- ENC attenuation range: 20Hz―1KHz
- Total harmonic distortion (THD): < 1% - 110 dB SPL (300 - 3,000 Hz)
- Transducer principle: Dynamic
- Ear Impedance 600 Ω mono / 1200 Ω stereo (each ear)
- Ear Freq Response: 12 - 15,000 Hz
- Microphone principle: pre-polarized condenser microphone (electret), noise-cancelling
- Mic Impedance: 150Ω nominal
- Mic Sensitivity: 400mV+/-6dB into 150Ω load @ 1kHz for 114 dB SPL input
- Mic Freq Response: 150 - 8,000 Hz
- Mic DC Supply V.: 8-16V, not polarity sensitive
- Source Resistance: 470Ω
- David Clark headset bag
