The Artex ME406 ACE (Absolute Cost Efficiency), a single output ELT, utilizes the same RF output and only one coax cable, connecting to the new series of Artex single input antennas to transmit 121.5 and 406 MHz emergency signals to the Cospas/Sarsat satellites. The ELT automatically activates during a crash and transmits the standard swept tone on 121.5 MHz. Every 50 seconds, for 440 milliseconds, the 406 MHz transmitter turns on and sends an encoded 5-watt signal to alert Search and Rescue. Helicopter model available upon request.
Simple Installation
The mounting hardware for the ME406 Series is compatible with all previous models of Artex 406MHzELTProducts,as well as the ELT200 Series, ACK, Pointer Model 3000 ELT and Narco ELTs. The self contained remote switch is powered bya6-yearlithiumbattery, making it independent from aircraft power.Cost-efficient Upgrade to Artex Technology
The new remote switch replaces the old ACK switch on the instrument panel, eliminating the need for alterations. A special adapter mounted onto the ME406 ACE ELT receives the plug on the ELT side of the wiring. Installation time is further reduced by reusing the existing wiring harness to connect the remote switch to the ELT.
- "ACE" - Absolute Cost Efficiency
- Upgrade ACK and 2-Frequency ELTs to Artex 406 MHzTechnology
- Replaces ACK remote switch in form, fit andfunction
- Re-use existing wiring harness from remote switch toELT
- Remote switch independent from aircraft power
- 6-year battery life
Certifications
- TSO C126
- ETSO 2C126
- Cospas/Sarsat Approved
- Transport & Industry Canada Approved
Retrofitting
The Artex ME406 ELT combined with the ACK remote switch retrofitsystem allows for re-using the existing wiring harness between ELTand cockpit remote switch.
- Immediate search and rescue response
- Position accuracy within 3 km
- Transmitter is identi?ed by serial number or aircraft ID
- Worldwide coverage
- Starts below $1,000.00 for complete package
- 5-Year battery life LiSO2/ LiMnO2
- Mounting holes compatible with most existing ELT housing
- Single antenna output for both frequencies
- Designed especially for the Private Pilot!
- 20 years of ELT design experience results in a breakthrough in design
- A low cost solution to 406Mhz technology requirements
- 121.5 and 406 MHz
- ELT weight: 2 lbs.
| Antenna Options Available | For Fixed Wing Applications: Rod: 110-338 (<350 KTS) Whip: 110-773 (<200 KTS) Auxiliary: 110-775 Helicopter Rod: 110-338 |
| Operating Frequencies | 121.5 MHz +/- 5 KHz, 406 MHz |
| Ouput Power | 406 MHz: 5 W (440 ms/ 50 sec) for 24 hours @ -20°C to +55°C 121.5 MHz: 100 mW minimum for 50 hours @ -20°C to +55°C |
| Output Connector | BNC Female |
| Activation | ME406 ACE: Automatic by 4.5 feet per second (2.3 G), Primary G-Switch or Manual Activation, Primary G-Switch or 12.5 G (+/-1 G), 5-Way Helicopter Model (HM) G-Switch or Manual Activation |
| Battery | 6 year Lithium (LiMnO2, solid cathode) |
| Temperature Certified to: | Operating: -20°C to +55°C, Storage: -55°C to +85°C |
| Self Test | G-Switch Enabled, 406 MHz Power, Antenna/Coax Connection, Low Battery |
| Remote Control | ON/ARM |
| Weights (with tray) | 2.05 lbs (933 g) |
| Measurements | ELT Transmitter with mounting hardware installed: 6.59” (167 mm)L x 2.86” (73 mm)H x 3.69” (94 mm)W |
| Accessories | Coax Cable, Audio Buzzer (alerts ground crews of accidental activations), Remote Switch, Interface Module (ME406 ACE) |
| Approvals | TSO C126 ETSO 2C126, COSPAS/SARSAT Approved, Transport & amp; amp, Industry Canada Approved |
| Helicopter Model | Available upon request (with multiple Axis G-Switch) |
- ME406 ACE (Pack List 455-6614)
- Antenna (110-773)
- Remote switch (453-0023)